IHT971S2XBG Freestanding island decorative cooker hood
HKD 31,800.00

Freestanding island decorative cooker hood IHT971S2XBG

Product code: 474650 Island cooker hood Control setting: SliderTouch control Max. noise level: 63 dB(A)re 1 pW Maximum extraction rate by extraction operation: 484 m³/h Airflow boost position (PowerBoost 1) - extraction: 673 m³/h Airflow boost position (PowerBoost 2) - extraction: 753 m³/h Energy class: A+ Gorenje Superior Line Dimensions (W×H×D): 89.8 × 5.9 × 61.1 cm
HKD 31,800.00


Icon - AdaptAir


No smell. Just air.
Patented AdaptAir technology ensures completely even air extraction over the entire hood surface. Steam, smells and impurities no longer enter the kitchen air.
Icon - SliderTouch


Easy control
A special innovative slider enables easy and instant changes between different power levels and lighting intensities.
Icon - Polyurethane filter

Polyurethane filter

Benefits of polyurethane foam
Unique aluminium grease filters are enhanced with a special polyurethane foam that eliminates up to 98% of all grease particles and other impurities. At the same time, the hood maintains its absorption efficiency.


Automatic fan operation
A special sensor, when in automatic operating mode, senses the level of impurities or steam, humidity and gasses and responds
suitably. It automatically adjusts the fan speed accordingly or, when it is no longer needed, even completely stops the fan.

TouchFree coating

Shiny and fingerprint-free finish
All stainless steel surfaces are coated with a special TouchFree film that prevents fingerprint markings, leaving the surface always shiny and making cleaning much easier.

Timer and refresh

Always fresh and punctual
Special advantages of new Gorenje hoods include setting the timing for automatic switching off and the refresh function which is activated every hour, refreshing the air for 10 minutes.

Re-circulating hoods

Re-circulating hoods draw in steam and odour saturated air through a filter, then returning the treated air into the kitchen. If ducting for extraction is not possible, then recirculation may be another option. In this case, the air is drawn through a charcoal filter that removes cooking odours and steam, and the clean air is recirculated back into the kitchen. Cooker hoods for recirculation are easy to install and are normally used in blocks of flats where installing ducts leading directly to the outside of the building can be difficult. Extraction hoods draw in cooking fumes and trap vapours in a filter while expelling odours to the outside through a ventilation duct. You can expect to have to change the charcoal filter once or twice a year, depending on how often the cooker hood is used.
More information
Less information

Noise level

More power with less noise
In today’s homes, the kitchen is a new focal point, which in turn has focused attention on noise levels produced by cooker hoods. Over the last few years, the capacity of hoods has increased significantly, and sound-absorbing materials are increasingly being used in many of Gorenje cooker hoods.
More information
Less information

Useful tips

• Remember to switch the cooker hood on before starting to cook, as this maximises the hood’s capacity.
• Leave the cooker hood running for another 15 minutes once you have finished cooking to remove the last few traces
of cooking odours.
• Remember never to open the kitchen window when using a cooker hood, as this affects air circulation and cancels out the low pressure.
• Choose a cooker hood that is at least as wide as your hob to achieve the best effect.
More information
Less information

What capacity do you need?

What sort of capacity should a new cooker hood have? This depends largely on the size of the kitchen. A good rule of thumb is that the hood should be able to replace the air 10 to 20 times per hour. For instance, if a kitchen measures 4 x 4 m with a ceiling height of 2.5 m, the cooker hood should replace approximately 400-800/m3 of air per hour.

Thus, the necessary extraction capacity is determined by the volume of your kitchen.
Calculation of the hood capacity that you need is:
10 x volume of your kitchen (volume = width x height x depth).

There will always be some loss of pressure when installing a hood. That is why it is important to observe the following rules:

• Always observe the hood’s recommended venting diameter (O) specified on the venting tube or pipe.
• Where possible, use smooth pipes to minimise air resistance.
• Try to make the installation as short as possible and with as few bends in the pipes as possible.
• You want gentle curves in the pipe rather than sharp bends, so that the air can pass through unhindered, minimising pressure loss.
More information
Less information
More featuresLess features

Technical details

Island cooker hood

Venting with air extraction or recirculation

Energy class: A+

Material of housing/chimney: stainless steel and glass / stainless steel

Colour of housing/chimney: stainless steel and black glass / stainless steel

Lightning efficiency class: D

Grease filtering efficiency class: B

Fluid dynamic efficiency class: A

Maximum extraction rate by extraction operation: 484 m³/h

Maximum extraction rate by recirculation operation: 286 m³/h

Venting tube diameter: 15 cm

Air flow by extraction version, step 1: 191 m³/h

Air flow by extraction version, step 2: 250 m³/h

Air flow by extraction version, step 3: 301 m³/h

Air flow by extraction version, step 4: 345 m³/h

AdaptTech: Automatic fan operation

Electronic control

Control setting: SliderTouch control

Timer function

Number of speed positions: 9

TouchFree Inox

Constant ventilation ReFresh

Lamp type: Led strip

Dimmer function

Number of lights: 2

Power of lights: 14 W

Airflow boost position (PowerBoost 1) - extraction: 673 m³/h

Airflow boost position (PowerBoost 2) - extraction: 753 m³/h

Airflow boost position (PowerBoost 1) – recirculation: 366 m³/h

Airflow boost position (PowerBoost 2) - recirculation: 366 m³/h

Filter material: Washable stainless steel with polyurethane foam and flaps

Highly efficient filter: AdaptAir

Grease filter indicator

Coal filter code (optional as separate purchase): 197465

Number of filters: 4

Recirculation set number: 493633

Motor type: Inverter motor

Number of motors: 1

Number of PowerBoost functions: 2

No return airflow flap: 150 mm

Max. noise level: 63 dB(A)re 1 pW

Height: 59 mm

Min. height of the chimney: 797 mm

Max. height of the chimney: 1,141 mm

Annual energy consumption: 44.1 kWh

Dimensions (W×H×D): 89.8 × 5.9 × 61.1 cm

Dimensions of packed product (W×H×D): 102.7 × 79.4 × 51.8 cm

Net weight: 36 kg

Gross weight: 43.8 kg

Connected load: 162 W

Nominal current of fuse: 10 amp

Product code: 474650

EAN code: 3838942011603


Related products